The spray foam we use inside the walls and roof of our house has lots of cool qualities, and it can benefit our house in a lot of different ways. The foam can expand into all of the hard to reach areas of the walls and roof.
But since it is an expensive investment, you’ll need to access the location where you’ll be installing the foam in. Here are the basics of spray foam installation that you should know.
Wear Proper Gear
The air coming out of the foam can be dangerous for you, so, keep yourself safe from those harmful fumes by using a mask. You should also wear a protective suit when starting the spraying project.
Don’t Spray On A Wet Surface
You should never spray on a wet surface. Generally, you should spray on a surface that is sitting dry for a few weeks. If you’re spraying foam on a wall that has been exposed to water damage, test the surface for any amount of moisture before spraying. A moisture meter can help you in this process.
Begin With Proper Plan
Before starting the spraying project first use the nozzle to spray some foam into the a trash can or an empty box. Remember that the tips of the nozzle will get clogged every time you stop spraying for over 30 seconds. Most of the kits already come some extra tips to solve this issue, but you can buy additional tips too if you want them for a bigger project. Shake the contents well before using them.
Cover Everything Else
Before starting the project, you should cover the windows by stapling the plastic cover to them. The gap that is make can later be filled with low expanding canned foam to cover the whole area. You should search “spray foam insulation contractors near me” to find a good contractor nearby.